575 tests
since 2007
454 times
we have received the highest recommendation.
Digital Tire Monitoring
ContiPressureCheck® Integrated
Remote Tire Monitoring
ContiPressureCheck® is Continental’s tire pressure monitoring system (TPMS) for individual vehicles, allowing the driver to see real-time tire pressure and temperature data.
Real-Time Tire Data Delivered
Take control of your fleet’s tire data while vehicles are on the road. ContiPressureCheck Integrated informs you of the real-time status of your tire pressure and temperature via your telematics dashboard.
- Alerts back-office personnel in real-time to tire issues on the road
- Potential for driver alerts via an optional in-cab display
- Powered by Continental’s intelligent tire
If you don’t have telematics, check out the Solutions Finder to identify the best solution for your fleet.
Current Partners
ContiPressureCheck Integrated is connected to participating telematics partners using specific cables and hardware.
A Continental expert will select the proper Continental integration cable and ContiPressureCheck kit for your specific needs. Third party complementary hardware may be required to be purchased separately from the telematics provider. Your installation expert will advise you on all components that you need.
Tire Sensors
The tire sensor is mounted onto the inner liner of the tire in order to collect data. Unlike wheel- or valve-mounted sensors, this placement ensures accuracy of the temperature and pressure data without influence from external factors. It also protects the sensor from theft and damage, especially in the case of curbing or sidewall abrasions, which can dislodge or damage a valve-mounted sensor.
The battery-powered sensor lasts up to six years or 400,000 miles, minimizing disruptions to your tire program. It can also be reused after retreading the casing.
The same TPMS sensors form the backbone of all Continental’s Digital Tire Monitoring solutions, including our ContiConnect Yard Reader for fleet terminals, ContiPressureCheck on-vehicle TPMS, and ContiPressureCheck Solo Trailer TPMS. This allows systems to be used interchangeably to meet the needs of your fleet.
Sensors can be installed in your existing Continental tires by a certified dealer, or you can order intelligent tires, which arrive pre-equipped with sensors from the factory.
Central Control Unit (CCU)
Central Control Unit (CCU) is mounted to the truck, near the center of each vehicle. It reads all the tire sensors within its radius, relying on the additional antenna to extend its reach. The CCU delivers the tire pressure and temperature data to the telematics platform.
It can also be used to show real-time data on the Continental in-cab display for driver visibility with ContiPressureCheck.
Hand Held Tool
Continental’s Hand Held Tool is used to wirelessly program each tire sensor. It is used during the initial setup of ContiPressureCheck Integrated to assign each tire sensor to the respective wheel position of the vehicle. It is also used when tires are rotated, for example, to reassign the sensor to the new wheel position.
The Hand Held Tool can also be used to read tire temperature and pressure data from each individual sensor if needed.
Benefits of Tire Monitoring
Tire monitoring will help your fleet:
- Improve tire runout
- Minimize irregular tire wear
- Save fuel
- Save labor & maintenance costs
- Reduce roadside breakdowns
- Improve safety
Learn more about the benefits of tire monitoring.
Short Description | Remote Tire Monitoring |
Monitors | Tire temperature and pressure of a single vehicle or multiple vehicles |
Data Access | Real-time data transmitted to the telematics dashboard + optionally to the driver via an in-cab display from the telematics provider or Continental |
| Alerts | Per the telematics platform |
Hardware | Tire sensors, CCU, wire harnesses, (optional) in-cab display, Hand Held Tool |